Csiba Woodworking Machinery Ltd. - Founded in 1992

Langzauner veneer saw LZ5/2

Technical Data:

• Cutting length: 3050, 3500, 4000, 4500 mm
  

• Cutting and milling height: 45 mm
  

• Sawblade diameter: 200 x 2,8 (1,5)x16 mm Z54
  

• Speed of sawblade: 9.000 U/min
  

• Motor power of saw: 2,2 kW
  

• Dimension of cutter: 85x50x30 mm Z4
  

• Speed of cutter: 10.500 U/min
  

• Motor power of cutter: 1,1 kW
  

• Required space approx. L/W/H (without rear table): 4550 x 700 x 1350 mm
  

Langzauner veneer saw LZ5/2E

Standard equipment:

• Compact unit with sawing and jointingLong cutting lengths but short overall machine length
  

• Pneumatic lifting and lowering of each unit on LM-system guide units with integrated dust-scraper.
  

• Horizontal guiding of both units on hardened and ground precision shaft with integrated dust-scraper.
  

• Automatic sawblade adjustment for excess length of veneer
  

• Electromotive feed with variable speed
  

• Central operating panel
  

• Pneumatic pressure beam incl. compensating gear rack via hand-valve
  

• Power supply chain to the units
  

Suitable for joint tight, splinter free cut of:

• Veneers
  

• Plastic coated panels
  

• Acryl
  

• Wood materials
  

• Plastic
  

• Light metals
  

• Cardboard
  

• other materials on request
  

Technical Data:

• Cutting length: 3050, 3500, 4000, 4500 mm
  

• Cutting and milling height: 45 mm
  

• Sawblade diameter: 200 x 2,8 (1,5)x16 mm Z54
  

• Speed of sawblade: 9.000 U/min
  

• Motor power of saw: 2,2 kW
  

• Dimension of cutter: 85x50x30 mm Z4
  

• Speed of cutter: 10.500 U/min
  

• Motor power of cutter: 1,1 kW
  

• Speed of autofeed: 2 - 25m/sec.
  

• Required space approx. L/W/H (without rear table): 4550 x 700 x 1350 mm
  

Langzauner LZ4S automatic

Electro-pneumatic lifting and lowering of both units according to adjusted operating position. Precition ball circulation guideway for vertical and horizontal movement of units.Three-stage cutting height adjustment via cone pulley. Automatic sawblade adjustment and size correction. Format talbe with lowering insert shoes. Depth of fence: 560 mm, Other sizes on request. Tiltable control panel with all operating units, as well as electronic machine- and position control included operating guide.

General information:

• Pneumatic pressure beam with compensating gear rack to enable also one-sided loading without tilting.
  

• Adjustable pressure of pressure beam for long or short pieces e.g. to avoid reproduction on soft materials.
  

• Automatic lowering of both units after working cycle
  

• Variable feed speed-therefore optimum adjustment to various materials and panel thicknesses
  

• Pneumatic controlled material support table
  

Suitable for joint tight, splinter free cut of :

• Plastic - Plastic coated panels - Acryl - Wood materials - Veneers - Light metals – Cardboard other materials on request
  

• Transparency safety cover as protection for engage and splinter
  

• Format tables in various sizes
  

• Electronic drive of parallel fence
  

• Pneumatic lowering of parallel fence with insert shoes
  

Technical Data:

• Cutting length: 3050, 3500, 4000, 4500 mm
  

• Cutting height: 45 mm
  

• Air consumption/cycle: ca. 12NI/6 bar
  

• Working pressure: 6 bar
  

• Exhaust data: (>20 m/sec) 1500 m
  

Langzauner FPM2000 Logicut panel saw

Special attention was taken on the technique of the sawing unit. Therefore the sawing unit has 6 ball bushings-wear bearings and has a electronic operating and speed control. Hinged flat screen (TFT) with a diagonal of 12", a resolution of 800 x 600 pixel in connection with a fail-safe and a vibration consistent industry-PC, with MS-Windows NT as operating system.

With the optional available cutting optimization – LOGICUT following jobs can be done:

• optimization manager
  

• remainder administration
  

• material administration
  

• edge calculation
  

• parts list administration
  

• parameter list
  

• commission administration
  

• and so on
  

Standard:

• Wide, ergonomic table
  

• Left sided table with angle stop - 1600 mm
  

• Massive chamber pressure beam with integrated compensating gear rack with a fin safety equipment
  

• Pre-adjustable pressure for long and short parts or to avoid pressure impressions on soft materials
  

• Saw combination of main- and scoring unit and both units are controlled separately
  

• Double, broad-gauged guiding of the saw unit with 6 times ball bushings-wear bearing on 2 hardened and ground precision shaft
  

• feed of the saw unit with infinitely variable speed and automatic fast-return stroke with lowered unit
  

• By lowering of the pusher clamps the board device center can be loaded with single boards or in stack
  

• Incl. AUTOMATIC GROOFING and REBATE
  

Technical Data:

• Cutting length: 3050, 3500, 4000, 4500, 5300
  

• Motor power of saw: 4kW bis 11kW
  

• Motor power of cutter: 1,1 kW to 1,5kW
  

• Sawblade diameter: 300 350x3,8x30
  

• Max. Cutting height: 95 mm
  

• Dimension of scoring blade: 200x3,2x2
  

• Speed of clamping units: up to 60 m/min
  

• Feed speed: 3-60m/min
  

• Fast-return speed: 60m/min
  

• Required air pressure: 7 bar
  

• Air consumption/ cycle: 17 NL
  

• Depth of format table: bis 4200 mm
  

• Absorption (m/h 25m/s): 2000 m
  

Langzauner FPM-Q through feed cross- and longitudinal saw

• e.g. for kitchen work plates, window seats, etc.