Csiba Woodworking Machinery Ltd. - Founded in 1992

JET JEB-1 edge bander

The edge bander is simple to operate and is designed to handle wood and polyester edge banding materials that are backed by a hot melt adhesive. The heating element has infinite adjustment within the 100 to 200 degree heating range It has non-skid rubber feet, a built-in plunge cutting knife and wide support table for the banding material roll. A double edge trimmer is supplied.

Main technical data:

• Hot air gun: P1 2000 W
  

• Fence height: 55 mm
  

• Band height: 50 mm
  

• Max. band strenght: 1,5 mm
  

• Table size: 680 x 192 mm
  

• Operating temperature: 100 to 200°C
  

• Dimensions (LxWxH): 680 x 667 x 238 mm
  

• Weight: 12 kg
  

Hebrock AKV 2000-F one-side edge bander

• For prepared, polyester edge banding materials
  

• No maintenance necessary, 4000 W, 3-phase warm-air spryer
  

• Without gears, electronic adjustbar
  

• Automatic cooling
  

• Upper doorgouge
  

• Folie unit for normal doorgouge
  

• Pneumatic cutting unit for max 3 mm
  

• High frequent level moulder unit n = 18000 U/min
  

Options

• 2nd moulder unit
  

• Derlivery unit
  

• Cleaning unit
  

• Pushing unit for straight edges
  

• Special forming unit for special profiles according to customer wishes (postforming not possible)
  

Hebrock KV 05 table edge bander machine

For max. 1 mm edge material thickness, for straight and camber edges.

• Max. edge thickness 1 mm
  

• Max. work piece thickness 50 mm
  

• Max. in-radii 25 mm
  

Hebrock KV 16 S table edge bander machine

With many options and possibilities, heating takes just 1 min.

• Max. edge thickness 1 mm
  

• Max. work piece thickness 45 mm
  

• Infeed speed 3-8 m/min
  

Options

• Electric end-cutting unit
  

• Hebrock-system level moulder
  

• Engine-driven press roller
  

• Press
  

• Electric temperature-control without gears
  

Hebrock AKV 83 edge bander

The most sold machine in the world. Until 1 mm material thickness, for using prepared edge materials. Modular construction and Hebrock-system edge moulder.

• Max. edge thickness: 1 mm
  

• Max. work piece thickness: 50 mm
  

• Infeed speed: 4 m/min
  

• Electric temperature-control without gears
  

• Level moulder and spool-cutter unit
  

Options

• End-cutting unit (on both sides)
  

• Moveable carriage with support door
  

• Console (on both sides)
  

• Tensile console (only on front side) with roller infeed (only with carriage support)
  

• 3-roller infeed device
  

Hebrock AKV 069 edge bander

Modular construction, great performance edge bander until 1 mm edge thickness.

• Max. edge thickness 1 mm
  

• Max. thickness of work piece 50 mm
  

• Infeed speed 4 m/min
  

• Standard equipment:
  

• Ungraded, electric temperature control
  

• Cooling automat
  

• Level moulder
  

• Table rollers
  

• Spool-cutter unit
  

• Control board
  

Options

• Console (on both sides)
  

• Endcutter unit (on both sides)
  

• Movable carriage with support door
  

• Tensile console (only on front side) with roller infeed (only with carriage support)
  

• 3-roller infeed device