Csiba Woodworking Machinery Ltd. - Founded in 1992

Hebrock top 2000 edge bander machine with glue application on the work piece

Edge bander, compact construction for hobby-users: easy to use up to 3 mm edge thickness

• Edge thickness: max. 3,0 mm
  

• Work piece size: max. 40 mm (50 mm)
  

• Work piece length: 250 mm (300 mm)
  

• Work piece width: min. 70 mm
  

• Infeed: 10 m/min.
  

• Heating time: ca. 5 min.
  

• Electrical need: kb. 6,5 kW
  

• Electric connection: 230/400 V 50/60 Hz
  

• Work height: 900 mm
  

• Machine size (LxWxH): 3300 x 1400 x 1300 mm
  

• Weight: kb. 550 kg
  

• No repair/montage necessery, fast-heating glue-tank
  

• Foil disk
  

• End cutting unit, at the front and end of the work piece glue-material will be cut: 1 x 0,37 kW  
  

• 18 000 U/min.
  

• Upper and lower level moulding unit 2 x 0,37 kW 18 000 U/min
  

• Exhauster diameter 100 mm
  

• Ergonomic control board
  

• Tensile material shoulder
  

Hebrock top 2000 plus edge bander machine with glue application on the work piece

For safety and comfort, until 3 mm edge thickness. Basic equipment is the flat citing (without pneumatic outpress unit), further equipment look up at Hebrock top2000.

Main technical data:

• Max. edge thickness: 3 mm
  

• Work piece size: 50 mm
  

• Infeed speed: Kb. 10 m/min
  

• Ready for operation n: 5 min
  

• Power required: ca. 6,5 kW
  

• Electric connection: 400V-3 phase-50 Hz
  

• Table heigth: 900 mm
  

• Size (LxWxH): 1300 x 1400 x 3400 mm
  

• Weight: Kb. 660 kg
  

• Exhaust: D=100 mm
  

Hebrock top 2003 edge bander machine with glue application on the work piece

Main technical data:

• Max. edge thickness: 3 mm
  

• Max. work piece height: 50 mm
  

• Infeed speed: ca. 10 m/min
  

• Ready for operation in: 5 min
  

• Power required: Kb. 6,5 kW
  

• Electric connection: 400V-3 phases-50 Hz
  

• Table height: 900 mm
  

• Size (LxWxH): 1300 x 1400 x 3700 mm
  

• Weight: Kb. 750 kg
  

• Exhauster: D=120 mm
  

Hebrock EURO 2000 one-side edge bander machine

EURO 2000 is a developed version of AKV 83, up to 3-8 mm thick material. Robust construction, small place required, easy to use, ideal for small work shops.

• Max. edge thickness: 3/8 mm
  

• Max. work piece width: 40/50 mm
  

• Infeed speed: 11 m/min
  

• Engine: 11,0 kW
  

• No repair necessary, with glue-tank equipped.
  

• HF-end cut unit for too much material in the front and in the back: 300 Hz, 18000 U/min
  

• HF-moulding unit for moulding at the front and at the back: 300 Hz, 18000 U/min
  

• Hebrock-system moulding fine-tuning from operator side
  

• Ergonomic command board
  

• Tensile material shoulder
  

Hebrock EURO 2000 Plus edge bander

• A version of EURO 2000 with flat citing
  

Hebrock AKV 2003 DK edge bander machine with glue application on the work piece

• Max. edge thickness: 3 (8) mm
  

• Max. thickness of work piece 40/50 mm
  

• Infeed speed 11 m/min
  

• Engine 7,5 kW
  

• HF-end cutting unit, to cut glue-material at the front and end of the work piece: 300 Hz, 18000 U/min
  

• HF-moulding unit 300 Hz, 18000 U/min
  

• Dimensions: 3900x1400x1300 mm
  

• Weight: 750 kg
  

• No repair necessary, fast heating glue-tank
  

• Hebrock-system moulding fine-tuning unit
  

• Ergonomic command board
  

• Tensile material shoulder
  

• Radiicitling
  

• Polishing unit
  

Hebrock EURO 3001 one-side edge bander machine

• Max. edge thickness 3 (8/12) mm
  

• Max. work piece thickness 40 mm
  

• Infeed speed 10 m/min
  

• Engine 6/7,4 kW
  

• HF-end cutting unit, to cut glue-material at the front and end of the work piece 300 Hz, 18000 U/min
  

• HF-moulding unit
  

• Moulding fine-tuning (Hebrock-system)
  

• Robust chain drive
  

• Double roller upper press
  

• Check-window (2 pc.)
  

• Tensile material loader
  

Hebrock AKV 3003 DK one-side edge bander machine

With free spaces for the equipment selected according to customer’s needs, further technical information is same as at euro 3001

Hebrock AKV 3005 DK one-side edge bander machine

SPS control system (with touch screen) with free spaces reserved for the equipment selected according to customer’s needs, further technical information is same as at euro 3001


Hebrock AKV 3006 DK one-side edge bander machine

with free spaces reserved for the equipment selected according to customer’s needs, further technical information is same as at euro3001


Hebrock EURO 3001-F one-side edge bander machine

With pointer moulder (DIA-tool) with free spaces reserved for the equipment selected according to customer’s needs, further technical information is same as at euro 3001

Hebrock AKV 3003 DK-F one-side edge bander machine

With pointer moulder (DIA-tool) with free spaces reserved for the equipment selected according to customer’s needs, further technical information is same as at euro 3001


Hebrock AKV 3005 DK-F one-side edge bander machine

With pointer moulder (DIA-tool), SPS control (with touch screen) with free spaces reserved for the equipment selected according to customer’s needs, further technical information is same as at euro 3001


Hebrock AKV 3006 DK-F one-side edge bander machine

With pointer moulder (DIA-tool), SPS control (with touch screen) with free spaces reserved for the equipment selected according to customer’s needs, further technical information is same as at euro 3001