Csiba Woodworking Machinery Ltd. - Founded in 1992

Attention! There are videos available about this machines in the "Mediabase"!

Rojek DH 10 wood crusher

Characteristics: applicable for crushing wattles, studs, boards to burn. Electric-, petrol engine or cardan- driven construction, CE norm

• Main technical data:
  

• Number of shifts: 2 pc.
  

• Number of knives: 6 pc.
  

• Length of chips: 60-80 mm
  

• Power: ca. 900 kg/h   ( 2 m
  

BGU USP 16 HZ/1 professional upright log splitter

Professional upright log splitter with own inbuilt hydraulic system with pump and 3-point hitch for connection to the tractor. PtO powered from the tractor.

• Sturdy steel construction with structural H-beam
  

• Fully retractable ALL DOWN cylinder for transportation purposes
  

• 2-stage auto-return valve to allow for quicker splitting stroke
  

• Steel H-beam frame with no-wear brass sliding plates and self-lubrication system
  

• Stepless adjustment of the splitting stroke
  

• Extra large hydraulic tank for increased endurance
  

• Standard rear gripping bar for easier handling
  

• Floor standing table for splitting short logs (standard)
  

Main technical data:

• Length of log: 1100 mm
  

• Ram stroke: 1050 mm
  

• Length of log with table: 550 mm
  

• Splitting power: 16 t
  

• Down speed 1.gear: 12 sec
  

• Down speed 2.gear: 6 sec
  

• Up-speed: 7 sec
  

• Splitter height with raised cylinder: 2540 mm
  

• Splitter height with retracted cylinder: 1980 mm
  

• Weight: 386 kg
  

BGU USP 22 HZ/1 professional upright log splitter

Own inbuilt hydraulic system with pump and 3-point hitch for connection to the tractor. PtO powered from the tractor.

• Sturdy steel construction with structural T-beam
  

• 50 mm thick steel underside
  

• Fully retractable ALL DOWN cylinder for transportation purposes
  

• 2-stage auto-return valve to allow for quicker splitting stroke
  

• Steel H-beam frame with no-wear brass sliding plates and self-lubrication system
  

• Stepless adjustment of the splitting stroke
  

• Standard rear gripping bar for easier handling
  

• Floor standing table for splitting short logs (standard)
  

• 3 years warranty for hydraulic pipes
  

• Optional remote control for pulling logs to the machine
  

Main technical data:

• Length of log: 1100 mm
  

• Ram stroke: 1050 mm
  

• Length of log with table: 550 mm
  

• Splitting power: 22 t
  

• Down speed 1.gear: 13 sec
  

• Down speed 2.gear: 6 sec
  

• Up-speed: 8 sec
  

• Splitter height with raised cylinder: 2600 mm
  

• Splitter height with retracted cylinder: 2008 mm
  

• Weight without table: 410 kg
  

BGU WK 700 Z Classic circular saws with tilt-bench

Welded angle steel construction

• Compact structure
  

• Delivered fully assembled (no assembling costs)
  

• High temp powder coating with scratch-proof weather resistant paints
  

• Safety controls and fenders as per CE machine directive
  

Main technical data:

• drive: cardan-shift 1 kW
  

• Rev: 1450 U/min
  

• Overload protection: null voltage releaser
  

• Cutting depth tilt-bench: 250 mm
  

• Saw blade (diameter): 700/30 mm
  

• Weight: 106 kg kg
  

BGU SSM 250 Z Compact saw and splitter combination machine

For logs with max. diameter of 270 mm
The standard machine works on a 3-point hitch and a cardan shaft for power take off from the tractor.
The saw is equipped with a clutch arbour to power the hydraulic system at start-up. The log splitter is controlled with a foot pedal. The cut piece drops onto the log carriage in the splitter and an hydraulic driven push-block forces the log against the wedge and out of the splitting unit while the saw is ready for the next cutting cycle. This combination of two separate sections and simultaneous log advancing/cutting and splitting assures great time and money savings.

BGU SP 30 HZH/S and SP 30 HEH/S Heavy-duty 30 ton log splitter

• Three-point hitch for power take off from any tractor from 35kW power. Inbuilt hydraulic system.
  

• Hydraulic timber lift
  

• 4 or 6 ways wedge with wedge lift cylinder
  

• Large extension table at splitter outlet for clean sticks collection. The next log easily and safely makes split wood sticks feed out of the splitter carriage and splay on the extension table.
  

• Fully retractable hydraulic cylinder for road transportation
  

• Adjustable stroke length
  

• Operation hour counter available on request
  

• Extra large, 50 l (11 gall.) hydraulic oil tank
  

• Model SP 30 HEH/S is powered by 2 electric motors (Output power 4.0 and 2.2 kW respectively)
  

Main technical data:

• Max. splitter stroke: 1250 mm
  

• Ram power: 30 t
  

• Drive: HZH: jointed shaft
  

• Down speed: 9 cm/sec
  

• Down turbo speed: 21 cm/sec
  

• Up-speed by jointed shaft drive: 14 cm/sec
  

• Drive HEH: 2 x E-Motor
  

• Truck power requirement HZH: 35 kW
  

• Width at delivery: 2990 mm
  

• Depth: 1660 mm
  

• Weight SP 30 HZH/S: 810 kg
  

• Weight SP 30 HEH/S: 890 kg
  

Watch the video showing the machine in operation!

BGU SM 500 E és SM 500 Z in-line hydraulic log splitter

• Solid, all-steel channels construction with an HEB H-beam
  

• Ram sliding on wear-proof, brass pads
  

• 1100 mm long cylinder shaft for 1 m full length log capacity
  

• Fully retractable ALL-IN cylinder for more compact storage asset
  

• Splitting wedge hydraulically adjustable and quickly replaceable
  

• Scratch-proof and weather-resistant powder coating
  

BGU ZWK 710 pto circular saw

Welded, heavy-duty, all-steel construction with laser-cut and press-bended chassis sides. User friendly, vibration less tilt-cradle of steel plate, high quality painting abrasion proof and resistant to weather agents, certificated compliance with the European CE-safety standards

Main technical data:

• Tilt-bench: ca.260 mm
  

• Rev: 1450 U/min
  

• Saw blade D= 700/30 mm
  

• Weight: 144 kg
  

BGU ZWTK 710 pto circular saw with tilt and tipping bench combination

Welded, heavy-duty, all-steel construction with laser-cut and press-bended chassis sides, suitable for cutting firewood as well as ripping and crosscutting operations, very quick manual conversion from bench to tilt-table system (no tooling required), robust longitudinal and transverse stops in price, high quality painting, abrasion proof and resistant to weather agents, certificated compliance with the European
CE-Safety Standards, standard castors for easy handling.

Main technical data:

• Table size: 1250 x 850 mm
  

• Table height: 850 mm
  

• Height of cut on the bench: ca.260 mm
  

• Height of cut of the table: 850 mm
  

• Rev: 1500 U/min
  

• Saw blade D= 700/30 mm
  

• Weight: 245 kg
  

BGU ZWK 790 tilt-bench circular saw

Up to 300 mm depth of cut, fast, easy blade change, power transmission to the blade shaft by means
of 3 toothed belt drives, extreme stability and durability assured by 185 kg of own weight, timber infeed rollers and adjustable log length gauge, standard castors and rear handling grip, vibration-proof, ergonomic log tilt-cradle, all-steel welded chassis out of square tubes, high-quality powder coating

Main technical data:

• Truck power required: from 12 kW
  

• No-volt release switch
  

• Depth of cut timber D=300 mm
  

• Rev: 1420 U/min
  

• Saw blade D= 750/30 mm
  

• Weight: 178 kg
  

BGU Profi-Cut PC 704 Z and PC 704 EZ circular saw bench

The machine attaches to the 3-point linkage of any agricultural tractor and operates from its rear power-take-off drive by means of a cardan shaft. Available also as a combination version (704 EZ) equipped with both PTO and E-motor drive and recommended for stationary use. Logs that are cut automatically drop onto a discharge hopper and from there on a conveyor belt that leads them to a nearby container or truck. No more messy and nasty picking of the logs and site clearing!

A machine specially conceived for those who deal in large firewood productions. The machine is capable to handle and process wood in full cord length up to approximately 1 m.

Main technical data:

• Max. log diameter: 270 mm
  

• Min. log diameter: 80 mm
  

• Saw blade diameter: 700/30 mm
  

• Power of engine (PC 704 EZ P1 S6 40 % ED): 7,5 kW
  

• Truck power requirement: 20 kW
  

• Max. cardan-shaft rev: 540 U/min
  

• Log length: 250 - 500 mm
  

• Length of carrying band: 3800 mm
  

• Max. elevation of belt top: 2600 mm
  

• Weight with transfer belt PC 704 Z: 420 kg
  

• Weight with transfer belt PC 704 EZ: 470 kg
  

• Belt width: 150 mm
  

• Delivery dimensions (LxWxH): 2,6 x 1,2 x 2,4 m
  

• 3-4 m
  

BGU Profi-Cut PC 704 Z/4 and PC 704 EZ/4 wood-processor circular saw

Main technical data:

• Max. log diameter: 270 mm
  

• Min. log diameter: 80 mm
  

• Diameter of saw blade: 700/30 mm
  

• Power of engine (PC 704 EZ P1 S6 40 % ED): 7,5 kW
  

• Truck power requirements: 20 kW
  

• Max. cardan-shaft rev: 540 U/min
  

• Log length: 250 - 500 mm
  

• Length of transfer belt: 4300 mm
  

• Max. elevation of belt top: 3200 mm
  

• Weight with transfer belt PC 704 Z/4: 515 kg
  

• Weight with transfer belt PC 704 EZ/4: 565 kg
  

• Belt width: 250 mm
  

• 3-4 m