Csiba Woodworking Machinery Ltd. - Founded in 1992

JET 10-20 Plus, 16-32 Plus, 22-44 Plus drum sander family

Machines open from one side, recommended mainly for window producers, but also ideal for small work shops where these mean a choice in opposite to the expensive contact sanders.

JET 10-20 plus

• 127x255 mm extruded aluminium drum, self-cooling, precision machined and balanced
  

• Drum operates at 1400 rpm
  

• Powerful motor facilitates work also in continuous operation,
  

• An infinitely variable feed rate of 0–3 m/min for maximum sanding results
  

• Height-adjustment handle allows significant height changes and 1/10 mm adjustments for extremely precise sanding thickness control
  

• Drum ball bearings are sealed and permanently lubricated
  

• A patented quick fastener mounted on the inside wall of the drum holds the abrasive strip tight on one side while a spring-loaded mechanism pulls on the other end to remove any slack
  

Sanding capacity:

• Max. width: 255 (510) mm
  

• Min. length: 60 mm
  

• Max. thickness: 75 mm
  

• Min. thickness: 0.8 mm
  

• Drum: 127 x 255 mm, extruded aluminium
  

• Infinitely variable feed: 0–3 m/min
  

• Dust port: 100 mm
  

• Motor power output: 1 HP / S1 100%
  

• Motor power input: 1.76 HP / S6 40%
  

• Weight: 38 kg
  

JET 16-32 plus

• 127x 405 mm extruded aluminium drum, self-cooling, precision machined and balanced
  

• Drum operates at 1400 rpm
  

• Powerful motor offers the advantages of heavier use for longer periods of time
  

• The guaranteed sanding tolerance over the entire sanding width is 0.25 mm
  

• An infinitely variable feed rate of 0–3 m/min for maximum sanding results
  

• Height adjustment handle allows radical height changes and 1/10 mm adjustments for extremely precise sanding thickness control
  

• Drum ball bearings are sealed and permanently lubricated
  

• A patented fastener mounted on the inside wall of the drum holds the abrasive strip tight on one side while a spring-loaded mechanism pulls on the other end to remove any slack
  

Sanding capacity:

• Max. width: 405 (810) mm
  

• Min. length: 60 mm
  

• Max. thickness: 75 mm
  

• Min. thickness: 0.8 mm
  

• Drum: 127 x 405 mm, extruded aluminium
  

• Infinitely variable feed: 0–3 m/min
  

• Speed: 1400 rpm
  

• Dust port: 100 mm
  

• Motor power output: 1.5 HP / S1 100%
  

• Motor power input: 2.6 HP / S6 40%
  

• Weight: 65 kg
  

JET 22-44 plus

• 127 x 560 mm extruded aluminium drum, self-cooling and balanced, makes it possible to sand
  

• even larger surfaces
  

• Automatic reduction of the rate of advance to avoid excessive material removal (Sand Smart)
  

• Infinitely variable feed rates ranging from 0–3 m/min and a drum speed of 1400 rpm guarantee maximum
  

• sanding results
  

• Sanding drum is easily adjustable parallel to the table
  

• 100 mm dust port for efficient dust collection
  

• Drum ball bearings are sealed and permanently lubricated
  

Sanding capacity:

• Max. width: 560 (1120) mm
  

• Min. length: 60 mm
  

• Max. thickness: 100 mm
  

• Min. thickness: 0.8 mm
  

• Drum: 127 x 560 mm, extruded aluminium
  

• Infinitely variable feed: 0–3 m/min
  

• Speed: 1400 rpm
  

• Dust port: 100 mm
  

• Motor power output: 1.75 HP / S1 100%
  

• Motor power input: 3.1 HP / S6 40%
  

• Weight: 115 kg
  

JET DDS-225 and 237 dual-drum sander

• Plenty of power and robust for production sanding
  

• Micro adjustable rear sanding drum to allow different chip removal
  

• Quick change of abrasive strips
  

• 75 mm and 100 mm wide abrasive strips can be used
  

• Hard-rubber coated sanding drums guarantee best working results
  

• The conveyor bed is guided on 4 solid jackscrews
  

• The 2 speed gearbox can match feed to different types of wood
  

• Two 100 mm dust ports promote a clean work environment
  

Sanding capacity:

• DDS-225  DDS-237
  

• Max. width:   635 mm   940 mm
  

• Min. length:   230 mm   230 mm
  

• Max. thickness:   133 mm   133 mm
  

• Min. thickness:   0.8 mm   0.8 mm
  

• Drums:    2x Ø 152 x 635 mm / 2x Ø 152 x 940 mm
  

• Speed:    1400 rpm  /  1400 rpm
  

• Abrasive strips width:  75 mm or 100 mm / 75 mm or 100 mm
  

• Feed speed:   2 or 3 m/min  /  2 or 3 m/min
  

• Feed motor power:  0.25 HP  /  0.25 HP
  

• Dust ports:   2x D=100 mm  / 2x D=100 mm
  

• Motor power output:  5 HP, S1 100% / 7,5 HP, S1 100%
  

• Motor power input:  7.5 HP, S6 40% /  11,5 HP, S6 40%
  

• Dimensions (LxWxH): 1090 x 1120 x 1090  1420 x 1090 mm 1090 mm
  

• Weight:   332 kg  /  440 kg